SO-Wd11 optical alarm device

Use:

The SO-Wd11 optical alarm device is destined for optical signalling by the set of LED diodes in burglar alarm systems. The SO-Wd11 optical alarm device is destined for indoor applications.


Construction:

The alarm device consists of two main parts. The first of which is the right alarm device in a housing of non-combustible material. It contains supply voltage terminals and pins which allow you to select one of three different flashing frequencies or to turn on continuous lighting. The second part – a socket is an element which fixes the alarm device to the ceiling or wall by means of two screws and anchor pegs.


Opening:

To open the alarm device you should: twist the shade to the left while holding the base. After that move apart the shade and the base.

Closing:

To close the alarm device you should adjust the markers. After that assemble the device and twist it to the direction marked with an arrow (sequence shown in the drawing).

SO-Wd11 closing scheme

Notice: The shade of the SO-Wd11 alarm device is available in the red or orange colour (at the customer’s request). When placing an order please give a desired colour marking respectively: SO-Wd11/C – a red shade, SO-Wd11/P –an orange shade.

Supply voltage 12 V DC
Current consumption in the off-state 0 mA
Current consumption at 12 V DC <35 mA
Ingress protection IP53D
Dimensions Ø 115×63 mm

SO-Wd11 connection diagram:

Jumper settings:

Continuous: continuous light
0.25s: flash frequency 4 Hz
1s: flash frequency 1 Hz
2s: flash frequency 0.5 Hz

Cooperating products

osłona zabezpieczająca OZ-40

OZ-40-2 cover

Use: The OZ-40-2 cover is destined to protect W2 signalling devices as well as fire detectors or other devices which…

Choose language